As a company that performs forklift maintenance in Abilene, TX, we often get questions about what people should—and, just as importantly, should not—do when servicing their forklifts. And we’re glad our clients are curious—after all, this is a heavy and complicated piece of machinery, and it is important that you know how to take care of it!
Do you own a forklift and have questions about how you ought to go about forklift maintenance in Abilene, TX? If so, read on to learn about the dos and don’ts of proper forklift maintenance. We hope this advice is helpful for you!
What you should do
We’ll start with the “dos” of proper forklift maintenance. Keep in mind that your safety is always the top priority when handling a forklift for any purpose.
You’ll want to make sure the forklift is properly blocked when you are securing the wheels. Keep your work area clean and well-lit, clean up any spilled oil or hydraulic fluid as soon as possible after it happens and give all your tools a proper once-over before you start using them.
Make sure that all tools are removed from the engine before you try starting it back up again. Make sure you treat the batteries with caution, and avoid touching the battery terminals with tools or other metal objects.
Before making any repairs, make sure you check the manufacturer’s list and manual. Inspect the forks for any twisted or bent parts.
If you follow these general “dos,” then you will be off to a solid start when it comes to forklift maintenance in Abilene, TX.
What you shouldn’t do
Now that you know what you should do during forklift maintenance, it’s time to go over what you shouldn’t do. Here are the most glaring “don’ts” in regards to forklift maintenance.
It is important to keep a clean, safe workspace, so do not leave your tools, parts, cans or anything else strewn about when working on a forklift. Never lift anything that is beyond your ability, and use leverage tools to lift things that are too heavy for you.
Never start a forklift if it is on wheel stands or a hoist lift. Do not work beneath the forklift truck unless they are supported by firm blocks.
And of course, never work on any part of a forklift truck if you are unfamiliar with how they work. That is what the experts are for!
Here to help
Do you still have questions about forklift maintenance in Abilene, TX. If so, you are in luck, because the team here at V-Bar Equipment Company is here to help. We have years of experience working with a wide range of forklift trucks, and we will be happy to use our skills and knowledge to your benefit.
Forklift maintenance is a tricky, complicated and potentially dangerous endeavor if you are not sure of what you are doing. If you don’t feel up to the task, don’t worry—just give V-Bar Equipment Company a call.
Categorised in: Forklift Maintenance
This post was written by Writer